Fitting instructions

The clock radio display is held in with 2 screws which are accessed by removing the cosmetic cover as shown in the pictures below.

1. Prise off the cosmetic cover using a small screwdriver.

2. Undo the 2 screws securing the old display.

3. Lift the old display out from the dash.

4. Disconnect the electrical plug from the rear of the old clock display.

5. Insert the plug into the new display.

6. Place the new display back into the dash.

7. Tighten up the 2 screws.

8. Push the cosmetic cover back into the correct position.

That’s it all done.